Updating ddns status Mobile supported sex chat rooms
In the DOS window, enter the command “ipconfig”, on a MAC enter the command “ifconfig”.
You will see the IPv4 address, the subnet mask and the default gateway.
This can only either start with 192.168 or 10…, so you know you are using an internal address if it starts with this.
To access the cameras remotely, you need it’s WAN address.
Many times, unchecking DHCP will present you with the necessary fields for an IP address, subnet mask, gateway and DNS. The easiest place to get this information is to go on a PC that is on the network and open a DOS window (on Windows, press the START button and then type “command” or on a Mac, run Terminal).
Use this subnet mask (typically 255.255.255.0) and default gateway (the IP address of the router).
For an IP address, use the first 3 sets of numbers and chose a higher number up to 253 for the last, for example, if it’s 192.168.1.12, you can use an IP address like 192.168.1.100.
Then you use a program the vendor provided on a CD that finds the IP address assigned to the camera.
You click on that and it brings up the in-camera software that lets you view and configure the camera.